Since we were on campus during the summer term, we decided to make ice moon cake by ourselves.
We dyed those dough before we started to make ice moon cake.
- Sep 25 Thu 2014 03:17
Ice Moon Cake
- Sep 16 Tue 2014 06:05
Be Patient
- Sep 07 Sun 2014 04:00
(HW) Aluminum Coating Process of NSOM Optical Fiber Probes
A probe is set to receive a thin film of Aluminum via a thermal evaporation vacuum system. The reason to coat the fiber in the vacuum system is to create a clean surrounding for the coating process. The thermal evaporation vacuum system includes a main chamber, ion gauge, roughing valve, high vacuum valve, fore-line valve, diffusion pump, mechanical pump, flow switch, heat sink, solid state relay, neutral bus, solenoid valves, and ammeter.
It is highly necessary to maintain an interlock for the diffusion pump by using the flow switch and solid state relay. The interlock is needed to prevent damage on the diffusion pump. Specifically, if there is not enough water passing through the flow switch, the diffusion pump cannot be turned on. The diffusion pump needs water when pumping vapor cycle and gas flow inside the system. The diffusion pump, VHS-6, is operated at 120 Volts with the solid state relay controlled by a 24 Volts power supply. Therefore, a solid state relay is designed to switch the power for the load circuitry of the diffusion pump. The neutral bus is technically allowed to bond the wires of the system. This thermal evaporation vacuum system is used to coat a thin layer of Aluminum on an optical fiber. Everywhere except the tip of the optical fiber has been covered in a thin layer of Aluminum.
- Aug 31 Sun 2014 03:18
Study Hard in the Weekdays and Play hard during weekend
In this summer during weekdays, most of time I am in the lab, library or my dorm in order to keep everything under control.
When I received the following message from International Student Office, I decided to have fun with them during the weekend.
~~~~Have you ever seen a Bollywood movie?
- Aug 21 Thu 2014 13:40
Make Fried Dumplings
- Aug 14 Thu 2014 12:02
Warm Message from Old Friend
- Aug 05 Tue 2014 09:11
Personal Statement to apply for an internship
- Jul 30 Wed 2014 03:46
I Saw a Free Movie in Portland's Living Room
- Jul 29 Tue 2014 08:43
Hands-on Experience
There is an old saying " To see is too believe," and I do agree with that. If I have the chance to prove it by myself, I will remember those theories for long time.
Since I handle the chemical etching in our laboratory, I know how important to neutralize the acid and base. If I need to memorize the reaction function, I will not be able to make it.
After I have some hands-on experiences, I can use Leak Detector to check if there is a leak in my system.
- Jul 27 Sun 2014 06:33
Edelweiss Sausage & Delicatessen
- Jul 19 Sat 2014 01:24
Practice Makes Perfect
I had a presentation, which was scheduled on last Wednesday, but it was postponed to this week.
When I prepared for my presentation, I talked to my roommates, who don't have any background knowledge of my study. The outcome works for me, at least they get the big picture of what i try to explain in the power-point.
Last Friday, when we have group meeting with my professor, who wanted me to change my subject of my presentation.
- Jul 13 Sun 2014 06:48
Hood River
- Jul 06 Sun 2014 06:32
Do Not Judge a Book by Its Cover
- Jun 28 Sat 2014 08:16
The Portland Spirit Cruise
Due to the miscommunication. I get a free ticker for myself and I can have one guest free admission for the cruise. International Cruise is the event honor our international students who has the achievement of graduating with an degree to PSU.
When I read the following message, it catches my attention.
The Alumni Association and the International Student Life Team are partnering to provide the best send-off event for our graduating international students and their guests. The cost of the ticket includes an entree selection, sides, bread, coffee, tea, soda, raffle prizes, and a 2-hour boat cruise on the scenic Willamette River. Bon Voyage!
- Jun 23 Mon 2014 02:43
Replace the Heater Element on the Diffusion Pump
Since our laboratory does not have 208 or 240 voltage power for us plug in the diffusion pump, we need to change the heater element to 120 Voltage.
The following message adapts for Varian VHS-6 Full Replacement Heater Assemble 120 V, 2200W. 18.5 A, 6.5 ohms.
The Varian VHS-6 diffusion vacuum pump Stovetop-Style full replacement heater is for use with 120 VAC input power. The heater pulls 2200W, 18.5Amps and has a room temperature resistance of 6.5 Ohms. To change the heater element of the Diffusion pump: