- Nov 23 Sun 2014 03:14
Temperature Drop
- Nov 16 Sun 2014 07:13
Flying Cat Coffee
- Nov 11 Tue 2014 08:40
(FOOD) Yataimura Maru
Yatimura Maru has happy hour everyday.
When I bike around the area of my neighbor, I decide to treat myself some yummy food.
Even those small dishes may not be able to full my stomach, I still want to give it a try.
When I bike around the area of my neighbor, I decide to treat myself some yummy food.
Even those small dishes may not be able to full my stomach, I still want to give it a try.
- Nov 04 Tue 2014 09:18
Connections: Celebrating the Mersereau Music Scholars
This was a free event held by PSU Alumni Association.
Connections: Celebrating the Mersereau Music Scholars
Those musicians connected to each other via different instruments.
Connections: Celebrating the Mersereau Music Scholars
Those musicians connected to each other via different instruments.
- Nov 01 Sat 2014 08:05
Happy Halloween
- Oct 23 Thu 2014 09:08
Flu Shot
- Oct 19 Sun 2014 11:33
Transfer my phone service from At&t to T mobile
I was a customer of AT&T for few years, but I transfer to T-mobile today.
The main issue is to cost down the phone bill.So I change my phone service from AT&T to T mobile now!
I need to give the IMEI number from the back of my device to AT&T for unlocking my phone, and I also need to provide account number, pin number to T-mobile.
The main issue is to cost down the phone bill.So I change my phone service from AT&T to T mobile now!
I need to give the IMEI number from the back of my device to AT&T for unlocking my phone, and I also need to provide account number, pin number to T-mobile.
- Oct 12 Sun 2014 08:04
Just Settle Down
Since I don't want to stay on campus for being on call all the time, I moved to a different place in the beginning of September.
This is a lovely place, which has two stories not including the basement.
This is a lovely place, which has two stories not including the basement.
- Oct 06 Mon 2014 13:20
Oregon Zoo
I was luck to have a chance to visit Oregon Zoo on Community Free Day.
October 4, 2014 - 09:00am to 04:00pm
Presented by Regence BlueCross Blue Shield of Oregon As a thank you to our community, the Oregon Zoo is offering free admission for all, all day!
October 4, 2014 - 09:00am to 04:00pm
Presented by Regence BlueCross Blue Shield of Oregon As a thank you to our community, the Oregon Zoo is offering free admission for all, all day!
- Oct 01 Wed 2014 03:23
Mini Hornit Lights & Sound Effects Unit For Bikes
- Sep 25 Thu 2014 03:17
Ice Moon Cake
Since we were on campus during the summer term, we decided to make ice moon cake by ourselves.
We dyed those dough before we started to make ice moon cake.
We dyed those dough before we started to make ice moon cake.
- Sep 16 Tue 2014 06:05
Be Patient
- Sep 07 Sun 2014 04:00
(HW) Aluminum Coating Process of NSOM Optical Fiber Probes
A probe is set to receive a thin film of Aluminum via a thermal evaporation vacuum system. The reason to coat the fiber in the vacuum system is to create a clean surrounding for the coating process. The thermal evaporation vacuum system includes a main chamber, ion gauge, roughing valve, high vacuum valve, fore-line valve, diffusion pump, mechanical pump, flow switch, heat sink, solid state relay, neutral bus, solenoid valves, and ammeter.
It is highly necessary to maintain an interlock for the diffusion pump by using the flow switch and solid state relay. The interlock is needed to prevent damage on the diffusion pump. Specifically, if there is not enough water passing through the flow switch, the diffusion pump cannot be turned on. The diffusion pump needs water when pumping vapor cycle and gas flow inside the system. The diffusion pump, VHS-6, is operated at 120 Volts with the solid state relay controlled by a 24 Volts power supply. Therefore, a solid state relay is designed to switch the power for the load circuitry of the diffusion pump. The neutral bus is technically allowed to bond the wires of the system. This thermal evaporation vacuum system is used to coat a thin layer of Aluminum on an optical fiber. Everywhere except the tip of the optical fiber has been covered in a thin layer of Aluminum.
It is highly necessary to maintain an interlock for the diffusion pump by using the flow switch and solid state relay. The interlock is needed to prevent damage on the diffusion pump. Specifically, if there is not enough water passing through the flow switch, the diffusion pump cannot be turned on. The diffusion pump needs water when pumping vapor cycle and gas flow inside the system. The diffusion pump, VHS-6, is operated at 120 Volts with the solid state relay controlled by a 24 Volts power supply. Therefore, a solid state relay is designed to switch the power for the load circuitry of the diffusion pump. The neutral bus is technically allowed to bond the wires of the system. This thermal evaporation vacuum system is used to coat a thin layer of Aluminum on an optical fiber. Everywhere except the tip of the optical fiber has been covered in a thin layer of Aluminum.
- Aug 31 Sun 2014 03:18
Study Hard in the Weekdays and Play hard during weekend
In this summer during weekdays, most of time I am in the lab, library or my dorm in order to keep everything under control.
When I received the following message from International Student Office, I decided to have fun with them during the weekend.
~~~~Have you ever seen a Bollywood movie?
When I received the following message from International Student Office, I decided to have fun with them during the weekend.
~~~~Have you ever seen a Bollywood movie?
- Aug 21 Thu 2014 13:40
Make Fried Dumplings