Grace的進修雜記:)

In our lab there are lots of projects required hand-on skill to build unit for making things go smoothly.

This tiny motor is needed to connect with a control unit, so I made a 3D printed box to hold the unit. However, those dimensions were hard to get it right the first place.

Unfortunately, my original connection did not turn out as good as my advisor's expaction, so he redid the design with different parts.  

The length of the wires needs to take into consideration.

Redo the design then print new one out.

Luckily the third printed box works, even I made the USB fitting hole a little small, but it went through, so we called it good.

在我們實驗室裡有時候除了要做一些硬體的故障排除，還需要有好的設計能力讓專案進行得更順利，沒想到從前第一份正式的工作用繪圖軟體製作2Ｄ的圖檔，現在進階到繪製三維空間的立體設計圖，因為列印的公差沒算好，要將所有物件都固定好竟然改了三次才完成！