Grace的進修雜記:)

Due to lots failure happening on our project, we started to question ourselves if something important is missing in the process.

We were able to find a solution to avoid this happening again, which requires to make a holder for checking resued component.

Our first holder is set to secure the component sideways, but the optical microscope has some limitations so we rethink the design.

It is verified that a 45 degree angle would help getting more detail check on the components.

We learned that thinking carefully before making it is necessary.

最近一直在面臨撞牆期，所以抽絲剝繭可能被遺漏掉的真因，所以我們決定重新檢視所需的物件，也因此我又重拾繪圖軟體，並且3D立體列印出可用部件。

雖然花了點時間設計，但結果可以協助我們在分析階段找出可重工的部分，希望接下來一切都順利！